Samson
Samson SCOM Compressor, Gate and Enhancer
£74.99
Delivery Charges
| Delivery from... | £7.99 |
See this product in our Eastbourne Music Superstore
The SCOM Plus adds a De-Esser (with Level control and meter) to decrease unwanted sibilance and a dedicated Limiter, with a separate Threshold control and Peak LED, to ensure that signal levels will not clip the inputs of your digital recorder or power amp.
The Enhancer function on the SCom Plus is switchable in/out. The Enhancer is fully adjustable and puts the "air" back into compressed material. The SCOM Plus also features both XLR and servo balanced Õ in. I/O connectors, +4/-10 input level switches, "Key Listen" for external triggering, and Gain Reduction and Input/Output level meters.
The Samson SCOM is a dual-channel, signal rack space Expander/Gate, Compressor/Limiter, and Enhancer designed to reduce noise, increase loudness, prevent clipping, and recover high frequencies that might get lost during heavy compression. The Expander/Gate section features a variable Threshold control, a Fast/Slow switch for setting release times, and Open/Closed LEDs for precise monitoring of the gate‰s operation. The Compressor/Limiter controls include Threshold, Ratio, Attack, Release, Output, and a switchable "Auto" function (attack and release times can be set manually or automatically). The Enhancer is fully adjustable and puts the "air" back into compressed material. The SCOM also features both XLR and servo balanced Õ in. I/O connectors, +4/-10 input level switches, "Key Listen" for external triggering, and Gain Reduction and Input/Output level meters.
The Enhancer function on the SCom Plus is switchable in/out. The Enhancer is fully adjustable and puts the "air" back into compressed material. The SCOM Plus also features both XLR and servo balanced Õ in. I/O connectors, +4/-10 input level switches, "Key Listen" for external triggering, and Gain Reduction and Input/Output level meters.
The Samson SCOM is a dual-channel, signal rack space Expander/Gate, Compressor/Limiter, and Enhancer designed to reduce noise, increase loudness, prevent clipping, and recover high frequencies that might get lost during heavy compression. The Expander/Gate section features a variable Threshold control, a Fast/Slow switch for setting release times, and Open/Closed LEDs for precise monitoring of the gate‰s operation. The Compressor/Limiter controls include Threshold, Ratio, Attack, Release, Output, and a switchable "Auto" function (attack and release times can be set manually or automatically). The Enhancer is fully adjustable and puts the "air" back into compressed material. The SCOM also features both XLR and servo balanced Õ in. I/O connectors, +4/-10 input level switches, "Key Listen" for external triggering, and Gain Reduction and Input/Output level meters.
Features & Specification
S•COM SPECIFICATIONS
Frequency Response - 20Hz to 20kHz + - 0.5 dB
Dynamic range - 95 dB, un-weighted, 22 Hz to 22 kHz
THD - 0.008 % typ. @ +4 dBu, 1 kHz
Crosstalk - 90dB, 22 Hz to 22 kHz
Detector - RMS
Expander/Gate
Trigger range - variable (Off to +10 dB)
Attack - <1 ms per 50 dB
Release - variable (Slow: 100ms / 1dB,
Fast: 100 dB / 100 ms)
Compressor Section
Threshold - -40 dB to +20 dB
Ratio - variable (1:1 to ∞:1)
Manual Attack Time - variable (0.3 ms / 20 dB
300 ms / 20 dB)
Manual Release Time - variable (0.05 to 5 Sec)
Output gain - variable (-20 to +20 dB)
Function Switches
Gate - Gate or Expander
Release - Fast/slow
Enhancer - Off to 1.0
Key - Switches the detector section
to external key input.
Auto - Sets automatic attack and
release times - program
dependent
I/O Meter - Switches the Input/Output meter
to read input or output level.
Stereo Link - Linking both channels for
stereo operation. Channel 1
becomes master.
Operating Level Changes the internal reference
level from +4 dBu to -10 dBV.
Meters & LED's
Gain Reduction 12 segment LED display:
1/2/4/6/9/12/15/18/21/24/
27/30 dB
Input/Output level 12 segment LED display:
-30/-24/-18/-12/-6/-3/0/+3/
+6/+9/+12/+18 dB
Expander/Gate Threshold - 2 LED's under and over signal
window
Function switch - LED indicator in each Signal Input
Connectors - XLR and 1/4" TRS jack
Impedance - 20k Ohm balanced, 10k Ohm unbalanced
Nominal Operating Level - Selectable +4dBu/-10 dBV
Max. Input Level - +21 dBu, balanced and unbalanced
CMRR Typ. 40dB, >55dB @ 1kHz Signal Output
Connectors - XLR and 1/4" jack
Impedance - 60 Ohms balanced, 30 Ohms unbalanced
Max. Output Level - +21 dBu, balanced and unbalanced
Key Input Connector - 1/4" jack
Impedance - 10 k Ohm
Max. Input Level - +21 dBu
Key Output Connector ..... 1/4" jack
Impedance - 2 k Ohm
Max. Output Level - +21 dBu
Power Supply
Mains Voltages/selectable - USA/Canada: ~120 V AC, 60 Hz
U.K./Australia: ~240 V AC, 50 Hz
Europe: ~230 V AC, 50 Hz
Fuse - 100-120 V AC; 250 mA
(slow-blow) 200-240 V AC: 125 mA (slow-blow)
Power Consumption - 5 Watts
Power inlet - Standard IEC receptacle/with fuse
Size Dimensions (H x L x D)- 1 3/4" x 19" x 7 3/4" 44.5mm x 482.6mm x 188mm
Weight Net Weight - 4.8 lbs (2.2 kg) Shipping Weight - 7.5 lbs (3.4 kgs)
Frequency Response - 20Hz to 20kHz + - 0.5 dB
Dynamic range - 95 dB, un-weighted, 22 Hz to 22 kHz
THD - 0.008 % typ. @ +4 dBu, 1 kHz
Crosstalk - 90dB, 22 Hz to 22 kHz
Detector - RMS
Expander/Gate
Trigger range - variable (Off to +10 dB)
Attack - <1 ms per 50 dB
Release - variable (Slow: 100ms / 1dB,
Fast: 100 dB / 100 ms)
Compressor Section
Threshold - -40 dB to +20 dB
Ratio - variable (1:1 to ∞:1)
Manual Attack Time - variable (0.3 ms / 20 dB
300 ms / 20 dB)
Manual Release Time - variable (0.05 to 5 Sec)
Output gain - variable (-20 to +20 dB)
Function Switches
Gate - Gate or Expander
Release - Fast/slow
Enhancer - Off to 1.0
Key - Switches the detector section
to external key input.
Auto - Sets automatic attack and
release times - program
dependent
I/O Meter - Switches the Input/Output meter
to read input or output level.
Stereo Link - Linking both channels for
stereo operation. Channel 1
becomes master.
Operating Level Changes the internal reference
level from +4 dBu to -10 dBV.
Meters & LED's
Gain Reduction 12 segment LED display:
1/2/4/6/9/12/15/18/21/24/
27/30 dB
Input/Output level 12 segment LED display:
-30/-24/-18/-12/-6/-3/0/+3/
+6/+9/+12/+18 dB
Expander/Gate Threshold - 2 LED's under and over signal
window
Function switch - LED indicator in each Signal Input
Connectors - XLR and 1/4" TRS jack
Impedance - 20k Ohm balanced, 10k Ohm unbalanced
Nominal Operating Level - Selectable +4dBu/-10 dBV
Max. Input Level - +21 dBu, balanced and unbalanced
CMRR Typ. 40dB, >55dB @ 1kHz Signal Output
Connectors - XLR and 1/4" jack
Impedance - 60 Ohms balanced, 30 Ohms unbalanced
Max. Output Level - +21 dBu, balanced and unbalanced
Key Input Connector - 1/4" jack
Impedance - 10 k Ohm
Max. Input Level - +21 dBu
Key Output Connector ..... 1/4" jack
Impedance - 2 k Ohm
Max. Output Level - +21 dBu
Power Supply
Mains Voltages/selectable - USA/Canada: ~120 V AC, 60 Hz
U.K./Australia: ~240 V AC, 50 Hz
Europe: ~230 V AC, 50 Hz
Fuse - 100-120 V AC; 250 mA
(slow-blow) 200-240 V AC: 125 mA (slow-blow)
Power Consumption - 5 Watts
Power inlet - Standard IEC receptacle/with fuse
Size Dimensions (H x L x D)- 1 3/4" x 19" x 7 3/4" 44.5mm x 482.6mm x 188mm
Weight Net Weight - 4.8 lbs (2.2 kg) Shipping Weight - 7.5 lbs (3.4 kgs)
