Skip to content

Series One

Blackstar S1-100 2 Channel 100 Watt Valve Head Blackstar S1-100 2 Channel 100 Watt Valve Head
£1,099.00
Available to order

Blackstar S1-100 2 Channel 100 Watt Valve Head

Built on the rock-solid foundation of the classic 100W EL34 power stage, this amplifier sets new standards for clean and crunch tones. Two channels and four footswitchable modes, complete with ISF, include the amazing Super Crunch for the biggest, crunchiest tones yet heard.The DPR control allows power to be reduced to 10W for studio and small venue work, while a series effects loop and MIDI switching further expand the flexibility of this professionally specified amplifier.

  • 100W Watt head with built-in DPR power reduction
  • 3 x ECC83, 1 x ECC82, 4 x EL34 valves
  • Clean channel with Warm (Plexi) and Bright (Class A) type modes
  • Overdrive channel with Crunch and Super Crunch modes
  • ISF equipped tone control section
  • Presence control
  • Master Volume
  • Series effects loop
  • MIDI switching
  • Speaker emulated output

 

Blackstar S1-104 EL34 Amp Head Blackstar S1-104 EL34 Amp Head
£1,249.00
Available to order

Blackstar S1-104 EL34 Amp Head

Four EL34 power valves form the backbone of this 100W high gain power house and provide unbelievable dynamics and head-room. The DPR control allows the power to be reduced down to 10W for beautiful power amp distortion at a much lower volume level. Setting new standards in tonal flexibility, the deceptively simple preamp section has four world-beating channels (6 modes) which are further augmented by dual ISF controls. With Series One customisation comes as standard and you will effectively design your own sound.

  • 100 Watt valve head with DPR
  • (3x) ECC83, (1x) ECC82 & (4x) EL34 power valves
  • 4 channels (footswitchable)
  • Speaker emulated output
  • Two overdrive channels with high and low output damping
Blackstar S1-200 4 Channel 200Watt Valve Head Blackstar S1-200 4 Channel 200Watt Valve Head
£1,499.00
Available to order

Blackstar S1-200 4 Channel 200Watt Valve Head

Blackstar has put a lot of research hours into their new Series One amplifiers. Featuring Blackstar's ISF (Infinite Shape Feature) and DRP (Dynamic Power Reduction) with an attention to detail and quality has produced some of the best valve amps and cabinets we have seen. Here is what Blackstar says about the S1-200 valve amp head, Four selected KT88 power valves form the backbone of this 200W high gain power house and provide unbelievable dynamics and head-room. The DPR control allows the power to be reduced down to 20W for beautiful power amp distortion at a much lower volume level.Setting new standards in tonal flexibility, the deceptively simple preamp section has four world-beating channels (6 modes) which are further augmented by dual ISF controls. With Series One customisation comes as standard and you will effectively design your own sound.

  • 200 Watt head with built-in DPR power reduction
  • 4 x ECC83, 1 x ECC82, 4 x KT88 valves
  • Four footswitchable channels
  • Clean channel with Warm (Class A) and Bright (Plexi) modes
  • Crunch channel with Crunch and Super Crunch modes
  • Two overdrive channels with high and low output damping
  • Two ISF equipped tone control sections
  • Presence and Resonance controls
  • Master Volume
  • Series effects loop
  • MIDI switching
  • Speaker emulated output

 

Blackstar S1-412A Angled Speaker cab Blackstar S1-412A Angled Speaker cab
£699.00
In Stock

Blackstar S1-412A Angled Speaker cab

The S1-412A delivers awesome tone and projection. Based on the vintage tall-style design, these cabinets use heavy-gauge wiring and finger-jointed birch-ply construction. Rear-mounted controls allow the cabinet to be used in mono (240W RMS; 4 Ohms or 16 Ohms) or stereo (120W / Channel; 8 Ohms per). Inside, four 12" Celestion G12 Vintage 30 loudspeakers give this cabinet its voice. The S1-412A is an angled (or "top") design; a companion S1-412B base (or "bottom") cabinet is also available. Castors are included.

  • 240W extension cabinet
  • Switchable mono 4 or 16 / stereo 2x8
  • Fingerjointed birch plywood construction
  • Heavy gauge wire
  • Celestion vintage 30 12" speakers

 

Blackstar S1-412A Pro Cab Blackstar S1-412A Pro Cab
£699.00
Available to order

Blackstar S1 412A Pro Guitar Speaker Cab

The standard '1960' size 4x12 cabinets are built using a special baffle construction for a more balanced mid range response. Using a new 8 ohm Celestion Vintage 30 speaker exclusively developed for Blackstar, you get a 4x12 with tone and projection unlike any other in its class.

Blackstar S1-412B Pro Cab Blackstar S1-412B Pro Cab
£699.00
Available to order

Blackstar S1-412B Pro Cab

The S1-412PRO guitar speaker cabinet delivers awesome tone and projection unlike anything in its class. These standard "1960"-size cabinets use heavy-gauge wiring and finger-jointed birch-ply construction. The internal baffle design delivers a balanced midrange response.Inside, four 12" Celestion Vintage 30 custom-voiced 8 ohm speakers give this cabinet its voice. The S1-412PRO can be used in mono (240W RMS; 8 ohms) or stereo (120W / Channel; 16 ohms per).

  • 240W extension cabinet
  • Mono 8 / Stereo 2x16
  • Fingerjointed birch plywood construction
  • Heavy gauge wire
  • Special baffle construction for a more balanced mid range response
  • Custom voiced Celestion Vintage 30 loudspeakers

 

Blackstar S1-412B Straight Speaker cab Blackstar S1-412B Straight Speaker cab
£699.00
Available to order

Blackstar S1-412B Straight Speaker cab

The Blackstar Series One S1412B 4x12" Straight Guitar Amp Cabinet is the perfect match for any Blackstar Series One head and will deliver superb tone and response. This cabinet features rugged fingerjointed birch plywood construction and is built to hit the road. Although reminiscent of the classic British amps of the 1960’s, this cabinet delivers up to the minute metal tone. Four 12” Celestion Vintage 30 loudspeakers pump out pure hard rockin’ tone that you’ve been dreaming about. The Blackstar Series One 412B guitar speaker cabinet has a 240 watt capacity. This cabinet is a must have for up and coming metal gods. Now you can fulfill your dream of owning a half-stack and possessing all the tone that comes with it.

  • 240W extension cabinet
  • Switchable mono 4 or 16 / stereo 2x8
  • Fingerjointed birch plywood construction
  • Heavy gauge wire
  • Celestion vintage 30 12" speakers

 

Blackstar S1-45 2 Channel 45 Watt Valve Combo Blackstar S1-45 2 Channel 45 Watt Valve Combo
£1,199.00
Available to order

Blackstar S1-45 2 Channel 45 Watt Valve Combo

Blackstar has put a lot of research hours into their new Series One amplifiers. Featuring Blackstar's ISF (Infinite Shape Feature) and DRP (Dynamic Power Reduction) with an attention to detail and quality has produced some of the best valve amps and cabinets we have seen. In Blackstar's own words here is what they say about the S1-45 Combo :- By switching both preamplifier and power amplifier parameters the Series One 45W delivers both Class A style tones with a bell-like ring and classic push-pull crunch depending on the mode selected. The ISF control removes the limitations of traditional designs allowing you to tune the tone to exactly the sound you are looking for.DPR can reduce the power down to 4.5W and MIDI switching and a series effects loop make the Series One 45 the ultimate pro’s combo.

  • 45W Watt combo with built-in DPR power reduction
  • 1 x ECC82, 3 x ECC83, 2 x EL34 valves
  • Clean channel with Warm (Plexi) and Bright (Class A) type modes
  • Overdrive channel with Crunch and Super Crunch modes
  • ISF equipped tone control section
  • Presence control
  • Master Volume
  • Series effects loop
  • MIDI switching
  • Speaker emulated output
  • 2 x Celestion custom designed lightweight Neo 12" speakers

 

Hello,

We are very sorry, but the browser you are visting us with is outdated and not complient with our website security.

Please upgrade your browser to a modern secure version to view our website.

Blackstar S1-100 2 Channel 100 Watt Valve Head

Built on the rock-solid foundation of the classic 100W EL34 power stage, this amplifier sets new standards for clean and crunch tones. Two channels and four footswitchable modes, complete with ISF, include the amazing Super Crunch for the biggest, crunchiest tones yet heard.The DPR control allows power to be reduced to 10W for studio and small venue work, while a series effects loop and MIDI switching further expand the flexibility of this professionally specified amplifier.

  • 100W Watt head with built-in DPR power reduction
  • 3 x ECC83, 1 x ECC82, 4 x EL34 valves
  • Clean channel with Warm (Plexi) and Bright (Class A) type modes
  • Overdrive channel with Crunch and Super Crunch modes
  • ISF equipped tone control section
  • Presence control
  • Master Volume
  • Series effects loop
  • MIDI switching
  • Speaker emulated output

 

Blackstar S1-104 EL34 Amp Head

Four EL34 power valves form the backbone of this 100W high gain power house and provide unbelievable dynamics and head-room. The DPR control allows the power to be reduced down to 10W for beautiful power amp distortion at a much lower volume level. Setting new standards in tonal flexibility, the deceptively simple preamp section has four world-beating channels (6 modes) which are further augmented by dual ISF controls. With Series One customisation comes as standard and you will effectively design your own sound.

  • 100 Watt valve head with DPR
  • (3x) ECC83, (1x) ECC82 & (4x) EL34 power valves
  • 4 channels (footswitchable)
  • Speaker emulated output
  • Two overdrive channels with high and low output damping

Blackstar S1-200 4 Channel 200Watt Valve Head

Blackstar has put a lot of research hours into their new Series One amplifiers. Featuring Blackstar's ISF (Infinite Shape Feature) and DRP (Dynamic Power Reduction) with an attention to detail and quality has produced some of the best valve amps and cabinets we have seen. Here is what Blackstar says about the S1-200 valve amp head, Four selected KT88 power valves form the backbone of this 200W high gain power house and provide unbelievable dynamics and head-room. The DPR control allows the power to be reduced down to 20W for beautiful power amp distortion at a much lower volume level.Setting new standards in tonal flexibility, the deceptively simple preamp section has four world-beating channels (6 modes) which are further augmented by dual ISF controls. With Series One customisation comes as standard and you will effectively design your own sound.

  • 200 Watt head with built-in DPR power reduction
  • 4 x ECC83, 1 x ECC82, 4 x KT88 valves
  • Four footswitchable channels
  • Clean channel with Warm (Class A) and Bright (Plexi) modes
  • Crunch channel with Crunch and Super Crunch modes
  • Two overdrive channels with high and low output damping
  • Two ISF equipped tone control sections
  • Presence and Resonance controls
  • Master Volume
  • Series effects loop
  • MIDI switching
  • Speaker emulated output

 

Blackstar S1-412A Angled Speaker cab

The S1-412A delivers awesome tone and projection. Based on the vintage tall-style design, these cabinets use heavy-gauge wiring and finger-jointed birch-ply construction. Rear-mounted controls allow the cabinet to be used in mono (240W RMS; 4 Ohms or 16 Ohms) or stereo (120W / Channel; 8 Ohms per). Inside, four 12" Celestion G12 Vintage 30 loudspeakers give this cabinet its voice. The S1-412A is an angled (or "top") design; a companion S1-412B base (or "bottom") cabinet is also available. Castors are included.

  • 240W extension cabinet
  • Switchable mono 4 or 16 / stereo 2x8
  • Fingerjointed birch plywood construction
  • Heavy gauge wire
  • Celestion vintage 30 12" speakers

 

Blackstar S1 412A Pro Guitar Speaker Cab

The standard '1960' size 4x12 cabinets are built using a special baffle construction for a more balanced mid range response. Using a new 8 ohm Celestion Vintage 30 speaker exclusively developed for Blackstar, you get a 4x12 with tone and projection unlike any other in its class.

Blackstar S1-412B Pro Cab

The S1-412PRO guitar speaker cabinet delivers awesome tone and projection unlike anything in its class. These standard "1960"-size cabinets use heavy-gauge wiring and finger-jointed birch-ply construction. The internal baffle design delivers a balanced midrange response.Inside, four 12" Celestion Vintage 30 custom-voiced 8 ohm speakers give this cabinet its voice. The S1-412PRO can be used in mono (240W RMS; 8 ohms) or stereo (120W / Channel; 16 ohms per).

  • 240W extension cabinet
  • Mono 8 / Stereo 2x16
  • Fingerjointed birch plywood construction
  • Heavy gauge wire
  • Special baffle construction for a more balanced mid range response
  • Custom voiced Celestion Vintage 30 loudspeakers

 

Blackstar S1-412B Straight Speaker cab

The Blackstar Series One S1412B 4x12" Straight Guitar Amp Cabinet is the perfect match for any Blackstar Series One head and will deliver superb tone and response. This cabinet features rugged fingerjointed birch plywood construction and is built to hit the road. Although reminiscent of the classic British amps of the 1960’s, this cabinet delivers up to the minute metal tone. Four 12” Celestion Vintage 30 loudspeakers pump out pure hard rockin’ tone that you’ve been dreaming about. The Blackstar Series One 412B guitar speaker cabinet has a 240 watt capacity. This cabinet is a must have for up and coming metal gods. Now you can fulfill your dream of owning a half-stack and possessing all the tone that comes with it.

  • 240W extension cabinet
  • Switchable mono 4 or 16 / stereo 2x8
  • Fingerjointed birch plywood construction
  • Heavy gauge wire
  • Celestion vintage 30 12" speakers

 

Blackstar S1-45 2 Channel 45 Watt Valve Combo

Blackstar has put a lot of research hours into their new Series One amplifiers. Featuring Blackstar's ISF (Infinite Shape Feature) and DRP (Dynamic Power Reduction) with an attention to detail and quality has produced some of the best valve amps and cabinets we have seen. In Blackstar's own words here is what they say about the S1-45 Combo :- By switching both preamplifier and power amplifier parameters the Series One 45W delivers both Class A style tones with a bell-like ring and classic push-pull crunch depending on the mode selected. The ISF control removes the limitations of traditional designs allowing you to tune the tone to exactly the sound you are looking for.DPR can reduce the power down to 4.5W and MIDI switching and a series effects loop make the Series One 45 the ultimate pro’s combo.

  • 45W Watt combo with built-in DPR power reduction
  • 1 x ECC82, 3 x ECC83, 2 x EL34 valves
  • Clean channel with Warm (Plexi) and Bright (Class A) type modes
  • Overdrive channel with Crunch and Super Crunch modes
  • ISF equipped tone control section
  • Presence control
  • Master Volume
  • Series effects loop
  • MIDI switching
  • Speaker emulated output
  • 2 x Celestion custom designed lightweight Neo 12" speakers