Skip to content

Diago Effects Pedalboards

Diago Commuter Pedal Board Diago Commuter Pedal Board
£64.99
£49.99
£15.00 off RRP
In Stock

Diago Cummuter PB08 Pedal Board

There are times when a hardcase pedalboard just isn't practical. You might be travelling on foot, or on the underground/metro, swinging by for a quick practice after work, or playing an acoustic set where you just need a few pedals. The Diago PB08 Commuter is an ultra-portable and lightweight alternative to our hardcase pedalboards. The Diago PB08 Commuter features a 12mm thick HDF board, with a tough, satin black coating for years of use on the road. We added 6 rubber pads, for high rigidity and to distribute weight evenly for a sturdy, solid feel. Nobody wants their board to bend when they step on a pedal. There's a built-in handle, machined right into the HDF board, for pulling the board out the case and carrying it about on stage. But if you don't need the handle, just stick your pedals over it - the Velcro goes right to the edge.
Diago MicroPower Power Supply Diago MicroPower Power Supply
£29.99
In Stock

Diago MicroPower Power Supply

The Diago Micropower9 is a smaller version of the Powerstation. Using the same low-noise digital technology as its bigger brother, the Micropower9 is perfect as a direct universal replacement for hundreds of other proprietary bulky and ugly wall warts, as well as being ideal for smaller pedal boards of up to 6 pedals. The Diago Micropower9 uses digital switch mode technology, making it quiet, light, efficient and tiny, reliably powering your pedal(s) so you can concentrate on making music.
Diago PS02 Diago daisy Chain Lead Diago PS02 Diago daisy Chain Lead
£9.99
In Stock

Diago PS02 - Diago Daisy Chain Lead

Power an additional 6 pedals with your Powerstation or Micropower9.

A daisy chain allows multiple effects pedals to be powered from the same 9V power supply. Each Diago Powerstation comes with one Deluxe Daisy Chain to power 6 effects pedals, but with a capacity of 3000mA it will power many more than that - we reckon up to about 30.

Use as many Deluxe Daisy Chains as you need to power your whole pedalboard. You can also use a Deluxe Daisy Chain with the 1000mA Micropower9 to power a smaller pedalboard.

Unlike most daisy chains, the Diago Deluxe Daisy Chain is rated up to the full 3000mA of the Powerstation - most cheaper designs would melt at that sort of current.

The Deluxe Daisy Chain has 30cm/12" of cable between each plug. If you need more than that, use a Black Adaptor (see below) as an extension. It also has extra-long (12mm) plugs to easily reach inside recessed power sockets.

Diago PS03 Green Adapter Lead Diago PS03 Green Adapter Lead
£5.99
£4.50
£1.49 off RRP
In Stock

Diago PS03 Green Adapter Lead

The Green Adaptor allows you to use the Diago Powerstation Pedal Board Power Supply to power pedals that require a centre-positive, 2.5mm barrel plug.
Diago PS04 Blue Adapter Lead Diago PS04 Blue Adapter Lead
£7.99
In Stock

Diago PS04 Blue Adapter Lead

The Diago Blue Adaptor is compatible with most guitar effects pedals such as Electro Harmonix, ProCo (RAT etc.), older DOD, Jacques, and other pedals. The adaptor also reverses polarity to a positive tip, 3.5mm (1/8") mini jack plug.
Diago PS05 Adapter Lead Red Diago PS05 Adapter Lead Red
£5.99
£4.50
£1.49 off RRP
In Stock

Diago PS05 Adapter Lead Red

The versatile Diago Red Adaptor can be used to power older Dunlop and some Fulltone pedals, Yamaha keyboards, samplers, and drum machines, as well as any other pedals. It reverses polarity to a centre +ve, 2.1mm barrel plug.

Hello,

We are very sorry, but the browser you are visting us with is outdated and not complient with our website security.

Please upgrade your browser to a modern secure version to view our website.

Diago Cummuter PB08 Pedal Board

There are times when a hardcase pedalboard just isn't practical. You might be travelling on foot, or on the underground/metro, swinging by for a quick practice after work, or playing an acoustic set where you just need a few pedals. The Diago PB08 Commuter is an ultra-portable and lightweight alternative to our hardcase pedalboards. The Diago PB08 Commuter features a 12mm thick HDF board, with a tough, satin black coating for years of use on the road. We added 6 rubber pads, for high rigidity and to distribute weight evenly for a sturdy, solid feel. Nobody wants their board to bend when they step on a pedal. There's a built-in handle, machined right into the HDF board, for pulling the board out the case and carrying it about on stage. But if you don't need the handle, just stick your pedals over it - the Velcro goes right to the edge.

Diago MicroPower Power Supply

The Diago Micropower9 is a smaller version of the Powerstation. Using the same low-noise digital technology as its bigger brother, the Micropower9 is perfect as a direct universal replacement for hundreds of other proprietary bulky and ugly wall warts, as well as being ideal for smaller pedal boards of up to 6 pedals. The Diago Micropower9 uses digital switch mode technology, making it quiet, light, efficient and tiny, reliably powering your pedal(s) so you can concentrate on making music.

Diago PS02 - Diago Daisy Chain Lead

Power an additional 6 pedals with your Powerstation or Micropower9.

A daisy chain allows multiple effects pedals to be powered from the same 9V power supply. Each Diago Powerstation comes with one Deluxe Daisy Chain to power 6 effects pedals, but with a capacity of 3000mA it will power many more than that - we reckon up to about 30.

Use as many Deluxe Daisy Chains as you need to power your whole pedalboard. You can also use a Deluxe Daisy Chain with the 1000mA Micropower9 to power a smaller pedalboard.

Unlike most daisy chains, the Diago Deluxe Daisy Chain is rated up to the full 3000mA of the Powerstation - most cheaper designs would melt at that sort of current.

The Deluxe Daisy Chain has 30cm/12" of cable between each plug. If you need more than that, use a Black Adaptor (see below) as an extension. It also has extra-long (12mm) plugs to easily reach inside recessed power sockets.

Diago PS03 Green Adapter Lead

The Green Adaptor allows you to use the Diago Powerstation Pedal Board Power Supply to power pedals that require a centre-positive, 2.5mm barrel plug.

Diago PS04 Blue Adapter Lead

The Diago Blue Adaptor is compatible with most guitar effects pedals such as Electro Harmonix, ProCo (RAT etc.), older DOD, Jacques, and other pedals. The adaptor also reverses polarity to a positive tip, 3.5mm (1/8") mini jack plug.

Diago PS05 Adapter Lead Red

The versatile Diago Red Adaptor can be used to power older Dunlop and some Fulltone pedals, Yamaha keyboards, samplers, and drum machines, as well as any other pedals. It reverses polarity to a centre +ve, 2.1mm barrel plug.