Skip to content

Marshall Electric Guitar Amps

If you are looking for some high quality electric guitar amps, then exploring what it is that Marshall have to offer is always well-advised. Marshall have built up a legendary reputation over the years for the performance levels of their amps. Take a look through this collection and you will be able to find out why.

A wide variety of ranges

At Bonners Music we have brought together the best of Marshall's electric guitar amp ranges. Take a look through the collection which includes amps from the Code series, DSL Series, MG Series, Origin Series and more. We always like to cater for a range of musicians, from the beginners to the pros. This goes for budget too, where we are keen to bring together collections that offer great value and great quality at the same time.

For performance and practice

This is just the case with the Marshall amps range, as you will see that there will be options for you if you are looking for a starter model, or if you are looking for a top of the range amp. A good quality amp is always going to be important, whether you are on the road or you are in the studio. Marshall are masters of their craft. With one of their amps, you can ensure that, whether you are practicing, jamming, writing or performing, you will be able to get the most out of your instrument.

Versatile and reliable

Marshall amps are versatile, meaning that you will be able to get those modern sounds as well as the classics. Varieties of tones, textures and reverb, along with a rich and deep power, means that these amps will give you buckets of performance pleasure!

Marshall 1936 2 x 12 extension Cab Marshall 1936 2 x 12 extension Cab
£379.00
Available to order
Marshall 1936 2x12 extension Guitar Cab The Marshall 1936 2 x 12 Cabinet has 2 x 12" Celestion G12T75 speakers to handle 150 watts of output power. The cabinet dimensions of the Marshall 1936 match full-size Marshall amplifier heads.The Marshall 1936 cab is a 2x12 with Celestion G12T75 speakers in either mono or stereo options (8 ohms mono; 16 ohms stereo). The Marshall 1936 is a smaller Mono / Stereo 2 x 12" cabinet ideally suited as an extension cabinet for combos and will support a full-sized amplifier head Cabinet Type - Base: Yes Speaker Type: G12T-75 Speaker Configuration: 2 x 12" Power (RMS): 150 Watt Selectable (Mono/Stereo): Yes Impedance (Mono): 8 Ohm Impedance (Stereo): 16 Ohm Dimensions (mm): 750 x 600 x 310 Weight: 24.6
Marshall 1960A 4x12 Angled Cab Marshall 1960A 4x12 Angled Cab
£599.00
£529.00
£70.00 off RRP
Available to order
Marshall 1960A 4x12 Angled Cab Cabinet Type - Angled: Yes Cabinet Type - Bass: Yes Speaker Type: G12T-75 Speaker Configuration: 4 x 12" Power (RMS): 300 Watt Selectable (Mono/Stereo): Yes Impedance (Mono): 16/4 Ohm Impedance (Stereo): 8 Ohm Dimensions (mm): 760 x 830 x 360 Weight: 36.4
Marshall Code Series PEDL-91009 Footswitch Pedal Marshall Code Series PEDL-91009 Footswitch Pedal
£49.00
In Stock
Marshall Code Series PEDL 91009 Footswitch This Marshall Code Series PEDL-91009 footswitch is a 'Must Have' for your Marshall Code series guitar amp.The four button footswitch on this Marshall Code Series PEDL-91009 allow you to switch between your favorite banks and patches. Optional upgrade for your Marshall code-series amp Lets you recall 3 of your favorite presets - great for clean/crunch/lead tones Cycles through sound banks discreetly LED readout lets you know what bank you're on Rugged switches and durable housing are designed to stand up to live abuse Black finish to match your Marshall Code series amp Compatible with Code 25, 50, and 100 amps Model: Code Series PEDL 91009 Footswitch SKU: PED-91009 Type: Footswitch amp controller for Marshall Code series Number of Footswitch Buttons: 4 Inputs: 1 x 1/4" (cable included) Height: 2" Width: 13" Depth: 5.9" Weight: 2.2 lbs. Manufacturer Part Number: PEDL-91009
Marshall CODE100 Guitar Amp Marshall CODE100 Guitar Amp
£339.00
£299.00
£40.00 off RRP
Available to order
Marshall CODE 100 Electric Guitar Amp Fully programmable, the Marshall CODE 100 combines authentic modelling of classic and contemporary Marshall tones with professional quality FX. CODE preamp, power amp and speaker cabinet models have been developed in collaboration with audio software pioneers Softube to create Marshall-Softube (MST) modelling, highly accurate recreations of classic and contemporary Marshall products and more. The Marshall CODE 100 has 14 MST preamps, 4 MST power amps and 8 MST speaker cabinets. It has 24 FX including: Compressor, classic stompbox Distortions, Auto Wah, Pitch Shifter, Chorus, Phaser, Flanger and Tremolo. It includes Delays with Tap Tempo, and studio quality Reverbs. CODE’s MST preamps produce some of the most acclaimed and best loved Marshall tones: JTM45 2245, 1962 Bluesbreaker, 1959SLP Plexi, JCM800 2203, JCM2555 Silver Jubilee, JCM2000 DSL100, JVM410H and more. CODE features EL34, 5881, EL84 & 6L6 MST power amps, and MST speaker cabinet models: 1960, 1960V, 1960AX, 1960HW, 1936, 1936V, 1912 & 1974X. CODE25 is loaded with a custom 10″ speaker. Connect via Bluetooth to control the Marshall CODE 100 and to stream music from your iOS or Android device using the GatewayTM App. Connect via USB to use CODE as a DAW interface to record, and to stream audio from you computer. Connect your MP3 player via CODE’s dedicated audio input to jam along with your favourite tracks or plug headphones in for a personal CODE experience. Connect CODE’s programmable footcontroller* to assign up to 30 Presets or control panel functions. *(PEDL-91009 – sold separately). Model: CODE100 100 Watt 2x12 Guitar Amplifier Combo SKU: CODE100 Dimensions: (H x W x D) 480 x 695 x 275 mm Weight: 24kg Amplifier Type: Modelling Wattage: 100 Watts Inputs: 1 Speaker: 2 x 12-inch Speaker Cabinet Models: 8: 1960; 1960V; 1960AX; 1960HW; 1936; 1936V; 1912; 1974X Effects: 24 (5 Simultaneously): Compressor; Classic Stompbox Distortions; Auto Wah; Pitch Shifter; Chorus; Phaser; Flanger and Tremolo; Delays with Tap Tempo; Studio Quality Reverbs Controls: BASS, MIDDLE, TREBLE, GAIN, VOLUME, PRE FX, AMP, MOD, DEL, REV, POWER, CAB Pre Amp Models: 14: JTM45 Clean; DSL Clean; American Clean; JVM Clean; Acoustic Simulator; Bluesbreaker; Plexi; American Crunch; British 50�s Crunch; JCM800; DSL OD; American OD; Silver Jubilee OD; JVM OD Power Amp Models: 4: Classic Marshall 100w; Vintage Marshall 30w; British Class A; American Class A/B Optional Extras: PEDL-91009 Footcontroller
Marshall CODE100H Guitar Amp Head Marshall CODE100H Guitar Amp Head
£299.00
£249.00
£50.00 off RRP
In Stock
Marshall CODE100H Electric Guitar Amp Head The Marshall CODE range combines the Marshall legacy with state of the art digital technology, culminating in our most versatile and impressive entry level product ever. The range offers a choice of digital amp models, power amps, cabinet simulations, FX and more. The Marshall CODE series also allows every tonal possibility; various choices of glistening cleans, vintage crunches and modern high gain options can be mixed with a classic Marshall 100w or British Class A power stage for example, and then a choice of various 1x12, 2x12 or 4x12 simulations. Adding your choice of 18 FX takes these sounds even further. Model: Marshall CODE100H Electric Guitar Amp Head SKU: CODE100H Technology: Digital Presets: 100 Wattage: 100w Inputs: 1 Controls: Bass, Middle, Treble, Gain, Volume, Pre FX, Amp, Mod, Del, Rev, Power, Cab Pre-Amp Models: 14 Power Amp Models: 4 Speaker Cabinet models: 8 FX : 24 (5 simultaneously) Footswitch: pedl-91010 included, pedl-91009 available seperately Cables Included: Power / Speaker Weight (kg): 11 Dimensions (mm): 590 x 210 x 300
Marshall CODE25 Guitar Amp Marshall CODE25 Guitar Amp
£151.00
£149.00
£2.00 off RRP
In Stock
Marshall CODE 25 Electric Guitar Amp Fully programmable, the Marshall CODE 25 combines authentic modelling of classic and contemporary Marshall tones with professional quality FX. CODE preamp, power amp and speaker cabinet models have been developed in collaboration with audio software pioneers Softube to create Marshall-Softube (MST) modelling, highly accurate recreations of classic and contemporary Marshall products and more. The Marshall CODE 25 has 14 MST preamps, 4 MST power amps and 8 MST speaker cabinets. It has 24 FX including: Compressor, classic stompbox Distortions, Auto Wah, Pitch Shifter, Chorus, Phaser, Flanger and Tremolo. It includes Delays with Tap Tempo, and studio quality Reverbs. CODE’s MST preamps produce some of the most acclaimed and best loved Marshall tones: JTM45 2245, 1962 Bluesbreaker, 1959SLP Plexi, JCM800 2203, JCM2555 Silver Jubilee, JCM2000 DSL100, JVM410H and more. CODE features EL34, 5881, EL84 & 6L6 MST power amps, and MST speaker cabinet models: 1960, 1960V, 1960AX, 1960HW, 1936, 1936V, 1912 & 1974X. CODE25 is loaded with a custom 10″ speaker. Connect via Bluetooth to control the Marshall CODE 25 and to stream music from your iOS or Android device using the GatewayTM App. Connect via USB to use CODE as a DAW interface to record, and to stream audio from you computer. Connect your MP3 player via CODE’s dedicated audio input to jam along with your favourite tracks or plug headphones in for a personal CODE experience. Connect CODE’s programmable footcontroller* to assign up to 30 Presets or control panel functions. *(PEDL-91009 – sold separately). Model: Marshall CODE25 25 Watt 1x10 Guitar Amplifier Combo SKU: CODE25 Dimensions: (H x W x D) 340 x 350 x 215 mm Weight: 6.1kg Amplifier Type: Modelling Wattage: 25 Watts Inputs: 1 Speaker: 1 x 10-inch Speaker Cabinet Models: 8: 1960; 1960V; 1960AX; 1960HW; 1936; 1936V; 1912; 1974X Effects: 24 (5 Simultaneously): Compressor; Classic Stompbox Distortions; Auto Wah; Pitch Shifter; Chorus; Phaser; Flanger and Tremolo; Delays with Tap Tempo; Studio Quality Reverbs Controls: BASS, MIDDLE, TREBLE, GAIN, VOLUME, PRE FX, AMP, MOD, DEL, REV, POWER, CAB Pre Amp Models: 14: JTM45 Clean; DSL Clean; American Clean; JVM Clean; Acoustic Simulator; Bluesbreaker; Plexi; American Crunch; British 50�s Crunch; JCM800; DSL OD; American OD; Silver Jubilee OD; JVM OD Power Amp Models: 4: Classic Marshall 100w; Vintage Marshall 30w; British Class A; American Class A/B Optional Extras: PEDL-91009 Footcontroller
Marshall CODE412 Guitar Cab Marshall CODE412 Guitar Cab
£209.00
In Stock
Marshall CODE412 Guitar Cab The Marshall CODE range combines the Marshall legacy with state of the art digital technology, culminating in our most versatile and impressive entry level product ever. The range offers a choice of digital amp models, power amps, cabinet simulations, FX and more. This Marshall CODE412 cab has 4x12 speakers to go with the Marshall CODE100H amp head. Model: Marshall CODE412 Guitar Cab SKU: CODE412 Dimensions (W x H x D): 695mm x 675mm x 390 mm Weight: 24kg Wattage: 100w Inputs: 1 Speakers size: 4 x 12" Output powe: 30w each Impedance: 8 ohm
Marshall CODE50 Guitar Amp Marshall CODE50 Guitar Amp
£259.00
£219.00
£40.00 off RRP
In Stock
Marshall CODE 50 Electric Guitar Amp Fully programmable, the Marshall CODE 50 combines authentic modelling of classic and contemporary Marshall tones with professional quality FX. CODE preamp, power amp and speaker cabinet models have been developed in collaboration with audio software pioneers Softube to create Marshall-Softube (MST) modelling, highly accurate recreations of classic and contemporary Marshall products and more. The Marshall CODE 50 has 14 MST preamps, 4 MST power amps and 8 MST speaker cabinets. It has 24 FX including: Compressor, classic stompbox Distortions, Auto Wah, Pitch Shifter, Chorus, Phaser, Flanger and Tremolo. It includes Delays with Tap Tempo, and studio quality Reverbs. CODE’s MST preamps produce some of the most acclaimed and best loved Marshall tones: JTM45 2245, 1962 Bluesbreaker, 1959SLP Plexi, JCM800 2203, JCM2555 Silver Jubilee, JCM2000 DSL100, JVM410H and more. CODE features EL34, 5881, EL84 & 6L6 MST power amps, and MST speaker cabinet models: 1960, 1960V, 1960AX, 1960HW, 1936, 1936V, 1912 & 1974X. CODE25 is loaded with a custom 10″ speaker. Connect via Bluetooth to control the Marshall CODE 50 and to stream music from your iOS or Android device using the GatewayTM App. Connect via USB to use CODE as a DAW interface to record, and to stream audio from you computer. Connect your MP3 player via CODE’s dedicated audio input to jam along with your favourite tracks or plug headphones in for a personal CODE experience. Connect CODE’s programmable footcontroller* to assign up to 30 Presets or control panel functions. *(PEDL-91009 – sold separately). MODEL: Marshall CODE50 Guitar Amp SKU: CODE50 TECHNOLOGY: DIGITAL PRESETS: 100 WATTAGE: 50W INPUTS: 1 CONTROLS: BASS, MIDDLE, TREBLE, GAIN, VOLUME, PRE FX, AMP, MOD, DEL, REV, POWER, CAB PRE AMP MODELS: 14 POWER AMP MODELS: 4 SPEAKER CABINET MODELS: 8 FX: 24 (5 SIMULTANEOUSLY) Speakers: 12"
Marshall DSL1CR Guitar Amp Marshall DSL1CR Guitar Amp
£299.00
£219.00
£80.00 off RRP
In Stock
Marshall DSL1CR Guitar Amp The latest version of the Marshall DSL Dual Super Lead Guitar amp range, launched for Winter NAMM show 2018, features the following: Adjustable power output The new Marshall DSL models feature adjustable power settings which provide all-valve tone at appropriate volumes for the bedroom to the stage. Unlike traditional power settings, the technology on the larger DSL models reshapes the power to the valves instead of turning off valve stages. This gives you the best all-valve tone at both low power or full power. Some careful tweaks to the EQ circuitry have moderated the overly bass-heavy sounds that some previous DSL models had out of the box. Don’t worry - you can dial it back in with the EQ should you wish. Our partnership with Softube® has led to award-winning plug-ins and exceptional tone in our CODE digital amps. This same partnership is behind the new emulated output feature. Both the headphones and line out on the DSL models benefit from accurate emulation of our famed 1960 cabinet. The DSL is now more versatile than ever, with new features including separate master volume controls, built-in reverb and resonance controls*. *Dependant on amplifier model Adjustable power output Reverb Celestion Eight-15 speaker for optimum performance and maximum output volume Softube® emulated output Silent recording mode (by disconnecting speaker) Model: Marshall DSL1C Output wattage: 1w (with power reduction option, 0.1w) Outputs: 1 x 1/4" jack speaker output, 16Ω load only, 1 x 3.5mm jack emulated out Inputs: 1 x 1/4" jack instrument input, 3.5mm jack Aux in, footswitch Controls: Classic gain channel (gain, volume), channel select, ultra gain channel (gain, volume), tone shift button, treble, middle, bass, deep EQ shift, reverb, low power option (on rear) Effects: Digital reverb Effects loop: Yes, series, send/return Speaker configuration: 1x8" Speaker model: Celestion G8C-15"Eight-15" (15w, 16Ω) Unit impedance: 16Ω Preamp valves: 2 x ECC83 Power amp valves: 1 x ECC82 Footswitch: PEDL-90012 included Cable: Detachable power cable included Weight: 7.9 kg / 17 lbs Width: 360 mm / 14.2" Height: 340 mm / 13.4" Depth: 215 mm / 8.5"
Marshall DSL1HR Guitar Amp Head Marshall DSL1HR Guitar Amp Head
£229.00
In Stock
Marshall DSL1HR Guitar Amp Head The latest version of the Marshall DSL Dual Super Lead Guitar amp range, launched for Winter NAMM show 2018, features the following: Adjustable power output The new Marshall DSL models feature adjustable power settings which provide all-valve tone at appropriate volumes for the bedroom to the stage. Unlike traditional power settings, the technology on the larger DSL models reshapes the power to the valves instead of turning off valve stages. This gives you the best all-valve tone at both low power or full power. Some careful tweaks to the EQ circuitry have moderated the overly bass-heavy sounds that some previous DSL models had out of the box. Don’t worry - you can dial it back in with the EQ should you wish. Our partnership with Softube® has led to award-winning plug-ins and exceptional tone in our CODE digital amps. This same partnership is behind the new emulated output feature. Both the headphones and line out on the DSL models benefit from accurate emulation of our famed 1960 cabinet. The DSL is now more versatile than ever, with new features including separate master volume controls, built-in reverb and resonance controls*. *Dependant on amplifier model Adjustable power output Reverb Softube® emulated output Silent recording mode (by disconnecting speaker) Model: Marshall DSL1C Output wattage: 1w (with power reduction option, 0.1w) Outputs: 1 x 1/4" jack speaker output, 16Ω load only, 1 x 3.5mm jack emulated out Inputs: 1 x 1/4" jack instrument input, 3.5mm jack Aux in, footswitch Controls: Classic gain channel (gain, volume), channel select, ultra gain channel (gain, volume), tone shift button, treble, middle, bass, deep EQ shift, reverb, low power option (on rear) Effects: Digital reverb Effects loop: Yes, series, send/return Unit impedance: 16Ω Preamp valves: 2 x ECC83 Power amp valves: 1 x ECC82 Footswitch: PEDL-90012 included Cable: Detachable power cable included
Marshall DSL20CR Guitar Amp Marshall DSL20CR Guitar Amp
£569.00
£399.00
£170.00 off RRP
In Stock
Marshall DSL20CR Guitar Combo Amp The latest version of the Marshall DSL Dual Super Lead Guitar amp range, launched for Winter NAMM show 2018, features the following: Adjustable power output The new Marshall DSL models feature adjustable power settings which provide all-valve tone at appropriate volumes for the bedroom to the stage. Unlike traditional power settings, the technology on the larger DSL models reshapes the power to the valves instead of turning off valve stages. This gives you the best all-valve tone at both low power or full power. Some careful tweaks to the EQ circuitry have moderated the overly bass-heavy sounds that some previous DSL models had out of the box. Don’t worry - you can dial it back in with the EQ should you wish. Our partnership with Softube® has led to award-winning plug-ins and exceptional tone in our CODE digital amps. This same partnership is behind the new emulated output feature. Both the headphones and line out on the DSL models benefit from accurate emulation of our famed 1960 cabinet. The DSL is now more versatile than ever, with new features including separate master volume controls, built-in reverb and resonance controls*. *Dependant on amplifier model Gain and volume per channel Dedicated resonance control EL34 valves Celestion Seventy-80 speaker High and low power settings Reverb Softube® Emulated output Includes 2 Way Footswitch Model: Marshall DSL20 Output wattage: 20w (with power reduction option to 10w) Speaker outputs: 3 x 1/4" jack sockets (16Ω load / 8Ω load), 1 x 3.5mm jack emulated line out Inputs: 1 x 1/4" instrument jack, 1 x 3.5mm jack Aux in MIDI in, footswitch Controls: Classic gain channel (gain, volume), channel select, ultra gain channel (gain volume), tone shift button, treble, middle, bass, presence, resonance, reverb, low power option (on rear) Effects: Digital reverb Effects loop: Yes, series, send/return Speaker configuration: 1x12" Speaker model: Celestion Seventy 80 speaker (16Ω, 80w) Unit impedance: 16Ω Preamp valves: 3 x ECC83 Power amp valves: 2 x EL34 Footswitch: PEDL-90012 included. Cable: Detachable power cable included Weight: 16.3 kg / 36 lbs Width: 420 mm / 16.5" Height: 500 mm / 19.7" Depth: 250 mm / 9.8"
Marshall DSL40CR Guitar Amp Marshall DSL40CR Guitar Amp
£739.00
£629.00
£110.00 off RRP
Available to order
Marshall DSL40CR Guitar Amp The latest version of the Marshall DSL Dual Super Lead Guitar amp range, launched for Winter NAMM show 2018, fetaure adjustable power settings which provide all-valve tone at appropriate volumes for the bedroom to the stage. Unlike traditional power settings, the technology on the larger DSL models reshapes the power to the valves instead of turning off valve stages. This gives you the best all-valve tone at both low power or full power. Some careful tweaks to the EQ circuitry have moderated the overly bass-heavy sounds that some previous DSL models had out of the box. Don’t worry - you can dial it back in with the EQ should you wish. Our partnership with Softube® has led to award-winning plug-ins and exceptional tone in our CODE digital amps. This same partnership is behind the new emulated output feature. Both the headphones and line out on the DSL models benefit from accurate emulation of our famed 1960 cabinet. The DSL is now more versatile than ever, with new features including separate master volume controls, built-in reverb and resonance controls*. Includes 2 way footswitch Model: Marshall DSL40 Output wattage: 40w (with power reduction option to 20w) Outputs: Speaker outputs: 5 x 1/4" jack sockets (16Ω load / 8Ω load / 4Ω load), 1 x 1/4" jack emulated line out Inputs: 1 x 1/4" instrument jack, 1 x 3.5mm jack Aux in MIDI in, footswitch Controls: Classic gain channel (gain, volume, clean crunch switch), ultra gain channel (gain, volume, OD1/OD2 switch), treble, middle, bass, tone shift switch, presence, resonance, reverb (classic gain channel), reverb (ultra gain channel), master select switch, master volume I, master volume II, loop on/off switch, low power option (on rear) Effects: Digital reverb Effects loop: Yes, series, send/return Speaker configuration: 1x12" Speaker model: Celestion V-Type speaker (16Ω, 80w) Unit impedance: 16Ω Preamp valves: 4 x ECC83 Power amp valves: 2 x EL34 Footswitch: PEDL-90012 included. Compatible with PEDL-91016 modes include: 1 - Clean (classic green) 2 - Crunch (classic red) 3 - OD1 (ultra green) 4 - OD2 (ultra red) 5 - Master 1/Master 2 (toggle) 6 - FX Loop on/off Cable: Detachable power cable included Weight: 22.9 kg / 50 lbs Width: 620 mm / 24.4" Height: 490 mm / 19.3" Depth: 252 mm / 9.9"
Marshall DSL40CRD Limited Edition Guitar Amp Cream Marshall DSL40CRD Limited Edition Guitar Amp Cream
£729.00
£629.00
£100.00 off RRP
In Stock
Marshall DSL40CRD Limited Edition Guitar Amp Cream This special edition Marshall DSL40CRD in cream looks gorgeous. A wonderful 40w all valve guitar amp with that classic British tones. The latest version of the Marshall DSL Dual Super Lead Guitar amp range, launched for Winter NAMM show 2018, fetaure adjustable power settings which provide all-valve tone at appropriate volumes for the bedroom to the stage. Unlike traditional power settings, the technology on the larger DSL models reshapes the power to the valves instead of turning off valve stages. This gives you the best all-valve tone at both low power or full power. Some careful tweaks to the EQ circuitry have moderated the overly bass-heavy sounds that some previous DSL models had out of the box. Don’t worry - you can dial it back in with the EQ should you wish. Our partnership with Softube® has led to award-winning plug-ins and exceptional tone in our CODE digital amps. This same partnership is behind the new emulated output feature. Both the headphones and line out on the DSL models benefit from accurate emulation of our famed 1960 cabinet. The DSL is now more versatile than ever, with new features including separate master volume controls, built-in reverb and resonance controls*. Includes 2 way footswitch Model: Marshall DSL40 Output wattage: 40w (with power reduction option to 20w) Outputs: Speaker outputs: 5 x 1/4" jack sockets (16Ω load / 8Ω load / 4Ω load), 1 x 1/4" jack emulated line out Inputs: 1 x 1/4" instrument jack, 1 x 3.5mm jack Aux in MIDI in, footswitch Controls: Classic gain channel (gain, volume, clean crunch switch), ultra gain channel (gain, volume, OD1/OD2 switch), treble, middle, bass, tone shift switch, presence, resonance, reverb (classic gain channel), reverb (ultra gain channel), master select switch, master volume I, master volume II, loop on/off switch, low power option (on rear) Effects: Digital reverb Effects loop: Yes, series, send/return Speaker configuration: 1x12" Speaker model: Celestion V-Type speaker (16Ω, 80w) Unit impedance: 16Ω Preamp valves: 4 x ECC83 Power amp valves: 2 x EL34 Footswitch: PEDL-90012 included. Compatible with PEDL-91016 modes include: 1 - Clean (classic green) 2 - Crunch (classic red) 3 - OD1 (ultra green) 4 - OD2 (ultra red) 5 - Master 1/Master 2 (toggle) 6 - FX Loop on/off Cable: Detachable power cable included Weight: 22.9 kg / 50 lbs Width: 620 mm / 24.4" Height: 490 mm / 19.3" Depth: 252 mm / 9.9"
Marshall DSL5CR Guitar Amp Marshall DSL5CR Guitar Amp
£439.00
£379.00
£60.00 off RRP
In Stock
Marshall DSL5CR Guitar Combo Amp The latest version of the Marshall DSL Dual Super Lead Guitar amp range, launched for Winter NAMM show 2018, features the following: Adjustable power output The new Marshall DSL models feature adjustable power settings which provide all-valve tone at appropriate volumes for the bedroom to the stage. Unlike traditional power settings, the technology on the larger DSL models reshapes the power to the valves instead of turning off valve stages. This gives you the best all-valve tone at both low power or full power. Some careful tweaks to the EQ circuitry have moderated the overly bass-heavy sounds that some previous DSL models had out of the box. Don’t worry - you can dial it back in with the EQ should you wish. Our partnership with Softube® has led to award-winning plug-ins and exceptional tone in our CODE digital amps. This same partnership is behind the new emulated output feature. Both the headphones and line out on the DSL models benefit from accurate emulation of our famed 1960 cabinet. The DSL is now more versatile than ever, with new features including separate master volume controls, built-in reverb and resonance controls*. Model: Marshall DSL5C Output wattage: 5w (with power reduction option, 1w) Outputs: 1 x 1/4" jack speaker output, 16Ω load only, 1 x 3.5mm jack emulated out Inputs: 1 x 1/4" jack instrument input, 3.5mm jack Aux in, footswitch Controls: Classic gain channel (gain, volume), channel select, ultra gain channel (gain, volume), tone shift button, treble, middle, bass, deep EQ shift, reverb, low power option (on rear) Effects: Digital reverb Effects loop: Yes, series, send/return Speaker configuration: 1x10" Speaker model: Celestion Ten-30 speaker (16Ω, 30w) Unit impedance: 16Ω Preamp valves: 2 x ECC83 Power amp valves: 1 x 12BH7 Footswitch: PEDL-90012 included Cable: Detachable power cable included Weight: 12.7 kg / 28 lbs Width: 455 mm / 17.9" Height: 420 mm / 16.5" Depth: 240 mm / 9.4"
Marshall JVM210H Valve Guitar Amp Head Marshall JVM210H Valve Guitar Amp Head
£1,169.00
£1,009.00
£160.00 off RRP
In Stock
Marshall JVM210H Valve Guitar Amp Head Designed to complement the versatility, tone and power of the awesome four-channel Marshall JVM4s™, the Marshall JVM2 Series broadens the JVM™ range without compromising its incredible sonic spectrum. With more configuration options than the JVM4, and a more streamlined front panel, the Marshall JVM2™ strikes a balance between flexible features and user friendliness, as well as offering 50 Watt options for guitarist who prefer the sound and feel of a lower Watt amp. This British-built 100 Watt Marshall JVM210H™ head offers a more straightforward two channel preamp, Clean/Crunch and Overdrive, than the JVM410H™ four channels, for guitarists who prefer a more stripped down, ‘fewer frills’ approach. The two independent channels both have three modes. Each mode reconfigures the gain structure of each channel, making six modes in total, which can take you from ‘Plexi’/JTM45™ cleans through JCM800™ punch to modern high-gain tones. The JVM210H is equipped with the same groundbreaking technology as its big brother, the JVM410H, featuring two studio quality Reverbs (one per channel), with individual channel EQ, two Master Volumes, and a memory that will recall your Reverb, FX Loop and Master settings. The JVM210H uses Stompware® switching technology and comes supplied with a fully programmable, four-button footswitch which connects to the amp using a standard guitar lead, so you’re not restricted by stage size – and if your cable fails, it’s very easy to replace. MODEL: JVM210H RANGE: JVM2 TECHNOLOGY: VALVE CHANNELS: 2 WATTAGE: 100W INPUTS: 1 (+MIDI) CONTROLS: VOLUME, GAIN, BASS, MIDDLE, TREBLE x 2, REVERB x 2, CHANNEL SELECT x 2, PRESENCE, RESONANCE, FX LOOP FOOTSWITCH/PROGRAMME PRE AMP VALVES: 4 x ECC83 POWER AMP VALVES: 1 x ECC83, 4 x EL34 FOOTSWITCH: PEDL-91006 INCLUDED (4 WAY FOOTCONTROLLER) CABLES: POWER/SPEAKER WEIGHT: (KG) 22 DIMENSIONS: (W x H x D) 740 x 310 x 215

Hello,

We are very sorry, but the browser you are visting us with is outdated and not complient with our website security.

Please upgrade your browser to a modern secure version to view our website.