KMA Machines Cirrus Delay Reverb Guitar Pedal
In-Depth Controls
- Delay: Sets the mix of your dry and Delayed signal. From fully dry counter-clockwise to fully wet clockwise and a 50 / 50 ratio at 12 o'clock.
- Time: Sets the Delay length. From a quick slap-back to long soaring echoes.
- Repeats: Sets the number of repeats. From a single echo to endless faux loops.
- Sens: Defines the sensitivity for the envelope features on each Mode. S/H: Depth and Rate of the Sample / Hold Filter. MOD: Modulation depth. OCT: Fade-in time of the Octave
- Mode-Switch (top left): Choose between a Modulated Delay (MOD), Sample / Hold Filtered Delay (S/H) or a fade-in Octave Delay (OCT).
- Tap-Division Switch: Choose between no division (1/1), a dotted eighth mode (1/8D) or a triplet mode (1/3).
- Reverb: Sets the mix of your dry and Reverb signal. From fully dry counter-clockwise to fully wet clockwise and a 50 / 50 ratio at 12 o'clock.
- Decay: Sets the decay of the Reverb - from a small room to an infinite space.
- Damp: Sets the high frequency response. Counter-clockwise for shiny bright reverberations or clockwise for dark and mysterious ambience.
- Sens: Defines the sensitivity for the envelope features on each Mode. HP: Sets the cut-off frequency of a closing High-Pass Filter. MOD: Sets the modulation depth. LP: Sets the cut-off frequency of an opening Low-Pass Filter.
- Mode-Switch (top right): Choose between a Modulated Reverb (MOD), an opening Low-Pass Filter (LP) or a closing High-Pass Filter (HP).
- Global Controls: Order-Switch: Select between two Delay and Reverb order Modes: RVB: Delay into Reverb DLY: Reverb into Delay
- EXP-Mode Switch: Sets which parameter will be controlled via an Expression-Pedal (follow the sun rays) - choose between TIME, REPEATS, SENS (DLY), SENS (RVB), DAMP or DECAY.
- Jacks: Input / Output: Upper right (triangle facing down) is your Input and upper left (triangle facing up) is your Output.
- EXP: Plug in your Expression pedal here. We recommend a standard TRS connection. DO NOT use a CV source on this connection, otherwise you can cause irreparable damage to the internal DSP chip.
- FX-Loop: Lets you insert any pedal before the Delay and Reverb and will also affect the dry signal. Use the Loop to create your own distinct Delay / Reverb sound by adding your favorite additional pedals upfront. You will need to obtain a separate Mono to TRS Stereo-Y- Splitter Cable - Ring for the output (send) and Tip for the input (return).
- Footswitches: Engage: Press the switch normally to turn the pedal on and off. When pedal is off, press and hold to engage the pedal momentarily, for as long as you hold the switch down. Release the switch and the pedal will turn off again. Press and hold the switch down when the pedal is engaged to max out the Reverb decay.
- Tap: Tap to set the Delay time. Press at least three times to set the time. Press and hold the switch to max out the Delay repeats.
- Internal Controls: Internal spill / trails cut DIP-Switch: Switch 1 - selects whether your signal is sent/not sent to the Reverb/Delay in Bypass (useful for creative uses such as big ambient drone pads etc.).: Switch 2 - activates hard bypass (OFF) or activates the Reverb and Delay trails (ON).
KMA Machines Cirrus Delay Reverb Guitar Pedal
Floating above your head, delicate and elusive yet dreamy and sweeping. Always in motion until it dissolves and merges with the all-immersive atmosphere around it.
Just close your eyes and let the KMA Audio Machines’ Cirrus Delay and Reverb carry you across the open sky, onto its sonic cloudscapes.
Cirrus is KMA Audio Machines’ first step into the fully digital realm. But we didn’t just want to do a regular and run-of-the-mill type of product.
No, what we came up with is a truly special and versatile, dynamically modulated combined Delay and Reverb pedal that will forever change your perception of time and space.
Made up of a Delay side and a Reverb side, both sides of Cirrus sport the most important basic controls such as Time (up to 1.5 sec). Repeats for the Delay and Decay and Damp for the Reverb. Plus, each side has its own mix control as well. So far so good, but now it’s time to jump down the sonic wormhole!
This little Spatial-Temporal Modifier gives you three different Delay AND Reverb modes, which all sport a special dynamic feature that is controlled by your picking attack. This enables you to create sounds that are certifiably out of this world! To set the sensitivity of how the sound reacts, every section has its own sensitivity control.
In-Depth Controls
- Delay: Sets the mix of your dry and Delayed signal. From fully dry counter-clockwise to fully wet clockwise and a 50 / 50 ratio at 12 o'clock.
- Time: Sets the Delay length. From a quick slap-back to long soaring echoes.
- Repeats: Sets the number of repeats. From a single echo to endless faux loops.
- Sens: Defines the sensitivity for the envelope features on each Mode. S/H: Depth and Rate of the Sample / Hold Filter. MOD: Modulation depth. OCT: Fade-in time of the Octave
- Mode-Switch (top left): Choose between a Modulated Delay (MOD), Sample / Hold Filtered Delay (S/H) or a fade-in Octave Delay (OCT).
- Tap-Division Switch: Choose between no division (1/1), a dotted eighth mode (1/8D) or a triplet mode (1/3).
- Reverb: Sets the mix of your dry and Reverb signal. From fully dry counter-clockwise to fully wet clockwise and a 50 / 50 ratio at 12 o'clock.
- Decay: Sets the decay of the Reverb - from a small room to an infinite space.
- Damp: Sets the high frequency response. Counter-clockwise for shiny bright reverberations or clockwise for dark and mysterious ambience.
- Sens: Defines the sensitivity for the envelope features on each Mode. HP: Sets the cut-off frequency of a closing High-Pass Filter. MOD: Sets the modulation depth. LP: Sets the cut-off frequency of an opening Low-Pass Filter.
- Mode-Switch (top right): Choose between a Modulated Reverb (MOD), an opening Low-Pass Filter (LP) or a closing High-Pass Filter (HP).
- Global Controls: Order-Switch: Select between two Delay and Reverb order Modes: RVB: Delay into Reverb DLY: Reverb into Delay
- EXP-Mode Switch: Sets which parameter will be controlled via an Expression-Pedal (follow the sun rays) - choose between TIME, REPEATS, SENS (DLY), SENS (RVB), DAMP or DECAY.
- Jacks: Input / Output: Upper right (triangle facing down) is your Input and upper left (triangle facing up) is your Output.
- EXP: Plug in your Expression pedal here. We recommend a standard TRS connection. DO NOT use a CV source on this connection, otherwise you can cause irreparable damage to the internal DSP chip.
- FX-Loop: Lets you insert any pedal before the Delay and Reverb and will also affect the dry signal. Use the Loop to create your own distinct Delay / Reverb sound by adding your favorite additional pedals upfront. You will need to obtain a separate Mono to TRS Stereo-Y- Splitter Cable - Ring for the output (send) and Tip for the input (return).
- Footswitches: Engage: Press the switch normally to turn the pedal on and off. When pedal is off, press and hold to engage the pedal momentarily, for as long as you hold the switch down. Release the switch and the pedal will turn off again. Press and hold the switch down when the pedal is engaged to max out the Reverb decay.
- Tap: Tap to set the Delay time. Press at least three times to set the time. Press and hold the switch to max out the Delay repeats.
- Internal Controls: Internal spill / trails cut DIP-Switch: Switch 1 - selects whether your signal is sent/not sent to the Reverb/Delay in Bypass (useful for creative uses such as big ambient drone pads etc.).: Switch 2 - activates hard bypass (OFF) or activates the Reverb and Delay trails (ON).
Delivery ETA's
For accurate delivery information, please contact our sales team on sales@bonnersmusic.co.uk or call 01323 639335. As a guide, despatch times are detailed below.
Additional charges will be made for delivery of heavy items to some areas. Charges may also apply to upgrades including (but not limited to) timed deliveries, piano assembly, delivery of large items, and when matching deals from other retailers. If you are unsure about our delivery charges, please contact us.
In Stock Products
Products that are shown as in stock will be sent using our standard delivery service within 2 working days from when payment is received. This excludes piano deliveries with full installation - see below.
Pre-Order Products
Products which are shown as pre-order are not in stock, but can be ordered and reserved for you from the next available shipment. Order today to reserve your place in the queue! Call or email us for the latest lead times on pre-order products.
Digital Piano Deliveries:
We have many flexible delivery options for most delivery pianos, based on your location and whether you require it flat-packed, or fully assembled in your home. Digital piano delivery options are shown at checkout.
Piano Deliveries
If you purchase a piano which is supplied with full installation, we will contact you once your order is received to arrange a convenient delivery date & time. Delivery & installation is usually within 14 days, but often sooner. Call us for current lead times on pianos.
Digital Piano Deliveries For Self-Assembly
Click here to see our specific information relating to piano deliveries.
If you choose our courier delivery/flat pack delivery method, please be aware that with larger items such as digital pianos, the courier is not contracted to carry them up any steps or stairs. If there are stairs leading to the front door of the delivery address, or you live in an apartment which is not on pavement level, it is your responsibility to arrange transportation from the pavement level to the delivery address. In this instance, the delivery driver may, at their own discretion assist you in carrying the parcels to the delivery address, but they are not contracted nor obliged to do so.
Do you need delivery upstairs, or delivery at a specific time?
For some larger items which need to be delivered upstairs - including pianos, we offer a timed delivery service using our own van and drivers. This service is free on some items and chargeable on others. Call us on 01323 639335 to discuss your specific delivery requirements.
No-one at home?
Our courier will try and deliver your parcel(s) twice. After the second failed attempt, your goods will be returned to our warehouse. If you would like us to try and deliver them again, we will charge the delivery charges associated with your order again.
Delivery Surcharges For Larger Items
For some larger items, delivery surcharges may apply to the following areas: Scotland, Wales, Channel Islands, Isle Of Wight, Cornwall, Ireland, North Of England above Leeds. Call us on 01323 639335 to check before ordering.
If you're set on buying your new instrument, there's no need to get weighed down by the total cost of it straight away. If you break it down into monthly payments over time, it's much more manageable than you might think. And our fixed interest rates mean you'll know exactly what you're paying from the start.
How it works
The finance options available are displayed on our individual product pages - just click the button under the price to see the available options for each product. Finance is available for most new and used instruments over £400.
Pay a fixed deposit, and the rest is split into monthly payments. At the end of your contract when you've made your final payment, the instrument or equipment is all yours. You could own that dream guitar, piano or keyboard sooner than you thought!
Which Finance Options Are Available?
Most products on our website show the available finance options. Some are interest free, and some are interest bearing. The options shown on the site are an example of what is available - if you would like to pay over a different period, give us a call on 01323 639335 and we’ll try and arrange a finance option that suits your budget.
How To Apply For Finance
To apply for finance, please add the product to your cart, proceed through checkout and select 'Apply For Finance' as your payment option where you can complete the application form online.
The Lender
Bonners Ltd acts as a credit broker and only offers credit products from Secure Trust Bank PLC trading as V12 Retail Finance. Bonners Ltd is authorised and regulated by the Financial Conduct Authority. Our registration number is 718966. Bonners Ltd is registered in England and Wales 1994113. Registered office 34 North St, Hailsham, East Sussex BN27 1DW.
Secure Trust Bank is registered in England and Wales 541132. Registered office: One Arleston Way, Solihull, B90 4LH. Authorised by the Prudential Regulation Authority and regulated by the Financial Conduct Authority and the Prudential Regulation Authority. Registration number: 204550.
Not all products offered by Secure Trust Bank T/A V12 Retail Finance are regulated by the FCA
KMA Machines Cirrus Delay Reverb Guitar Pedal
*Piano Cabinet Finishes Of Showroom Models May Vary